Forward-Focused Spotlight Output
The roof-mounted white LEDs project additional light ahead of the Maverick for trails, campsites, hunting areas, nighttime work, and other low-light off-road situations.
No-Drill Roof Installation
The vehicle-specific housing mounts near the front edge of the roof without drilling or cutting the factory sheet metal, while the supplied wiring connects through dedicated light controls.
shield
Aluminum-alloy light housings with a black protective finish are designed for normal exterior exposure, while the white LEDs provide low-power auxiliary illumination.
Designed for Direct Installation
Installation
Designed for direct installation with the instructions and tools needed for setup.
DIY Friendly
Designed for direct installation without professional help.
Instructions Included
Follow the supplied guide during installation.
Tools Included
The necessary installation tools are provided.
Support Available
Contact Mabett for additional installation guidance.
Vehicle compatibility
Fitment
Confirm your model year and trim before ordering.
Compatible
Fits These Mavericks
2022–2026 Ford Maverick
Not compatible
Does Not Fit
None
Frequently asked questions
Before You Order
Quick answers about fitment, installation, protection, and care.
Is this roof light bar intended for public-road use?
No. The light bar is marketed for off-road and private-property use. Do not operate it where the beam may distract or blind other road users, and check the auxiliary-lighting regulations that apply in your state or local area.
What type of beam does the light bar produce?
The LED modules are designed primarily as forward-facing spotlights. They concentrate light ahead of the Maverick rather than creating the wide side coverage normally provided by ditch lights or flood-pattern pods.
Does it provide side lighting for turns, trails, or wildlife?
Side coverage is limited because the lights are aimed mainly forward. Add properly positioned ditch or flood lights when broad left-and-right illumination is required.
Can the beam direction be adjusted?
The housing is designed around a fixed vehicle-specific roof position. No independent side-to-side beam-spread adjustment is currently published. Confirm the intended light direction before permanently mounting the housing.
