Automatic Strap Retraction
Pull out only the length you need, tighten the built-in ratchet, then release the mechanism to retract the webbing without manually rolling or untangling loose straps.
Pull out only the length you need, tighten the built-in ratchet, then release the mechanism to retract the webbing without manually rolling or untangling loose straps.
The mounting position can be adjusted vertically to better match different cargo heights and can be used with compatible truck-bed sliding rails.
Bright orange polyester webbing is easier to see in low light, while coated carbon-steel ratchet housings help resist everyday exposure to rain, sunlight, and truck-bed conditions.
Designed for Direct Installation
Designed for direct installation with the instructions and tools needed for setup.
Designed for direct installation without professional help.
Follow the supplied guide during installation.
The necessary installation tools are provided.
Contact Mabett for additional installation guidance.
Vehicle compatibility
Confirm your model year and trim before ordering.
Compatible
Not compatible
Frequently asked questions
Quick answers about fitment, installation, protection, and care.
The package includes two pre-assembled retractable ratchet strap units—one for the left side and one for the right side of the Maverick truck bed.
Each polyester strap extends approximately 9 feet. The listed strap size is 3.2 meters long and 47 millimeters wide.
Release the ratchet tension according to the operating instructions, keep control of the hook, and guide the webbing back toward the housing. The internal reel automatically stores the strap without requiring manual rolling.
No. Hold the hook and guide the strap during retraction. Allowing the metal hook to snap back uncontrolled can damage the truck bed, the ratchet housing, nearby cargo, or the strap guide.